Playing Back Ipod Music; Connecting An Ipod - Yamaha RX-S600 Owner's Manual

Playing back iPod music

You can play back iPod music on the unit using a USB cable
supplied with the iPod.
• An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
• To play back iPod videos on the unit, an Apple Composite AV Cable* (not
supplied) is required. Connect the USB and composite video plugs of the Apple
Composite AV Cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit,
and connect your TV and the unit with a video pin cable (p.23). To select a video,
operate the iPod itself in the simple play mode (p.58).
* You cannot use the Apple Composite AV Cable with the iPod which has the
Lightning connector, or the iPod which does not support the video playback.
Made for.
iPod touch (1st, 2nd, 3rd, 4th and 5th generation)
iPod nano (2nd, 3rd, 4th, 5th, 6th and 7th generation)
iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
iPad (4th and 3rd generation), iPad 2, iPad, iPad mini
(as of July 2013)

Connecting an iPod

Connect your iPod to the unit with the USB cable supplied with the
iPod.
1
Connect the USB cable to the iPod.
2
Connect the USB cable to the USB jack.
The unit (front)
RADIO VIDEO AUX
AUDIO VIDEO 5V 2.1A
USB
Connected
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours.
If "Network Standby" (p.91) in the "Setup" menu is set to "On", it continues to
change without limit.
• Disconnect the iPod from the USB jack when it is not in use.
PLAYBACK ➤ Playing back iPod music
VOL.
SW
C
L R
SL SR
56
En