Connecting Video Devices (Such As Bd/Dvd Players) - Yamaha aventage RX-A3070 Owner's Manual

■ Connecting another TV or a projector
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with
an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the
remote control (p.75).
HDMI OUT 2 jack
The unit HDMI OUT
(HDCP2.2)
2 1
(rear)
(ZONE OUT) ARC
HDMI OUT
(HDCP2.2)
AV 1 AV 2
2 1
(ZONE OUT) ARC (1 BD/DVD)
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 BD/DVD) AV 1 P P
Y B R
A
VIDEO
B
P P
Y AV 2 B R
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(2 TV) ZONE OUT/PRE OUT
L
L
R R
ZONE 2/ ZONE 3/
FRONT
GND 1 OPTICAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL F.PRESENCE R.PRESENCE
R SURROUND L
AUDIO 4 ANTENNA
R L (4 RADIO)
FM AM
75
Y
• HDMI Control is not available on the HDMI OUT 2 jack.
• If you set "HDMI OUT2 Assign" (p.157) in the "Setup" menu to "Zone2" or "Zone4", you can connect a video
monitor for Zone2 or Zone4 to the HDMI OUT 2 jack and enjoy videos and audio using the video monitor (p.114).
TV
HDMI
HDMI input
HDMI
Projector
TV (already connected)

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the
unit. Depending on the video/audio output jacks available on your video device, choose one of
the following connections. We recommend using an HDMI connection if the video device has
an HDMI output jack.
Y
The following explanation is based on the assumption that you have not changed the "Input Assignment" setting
(p.158) in the "Setup" menu. As necessary, you can assign the COMPONENT VIDEO (A, B), COAXIAL (3, 4, 5)
and OPTICAL (1, 2, 6) jacks to another input source.
X
If you make more than one audio connection for one input source, an audio signal played back on the unit will be
determined according to the "Audio Select" setting (p.128) in the "Option" menu.
■ HDMI connection
Connect a video device to the unit with an HDMI cable.
The unit (rear)
HDMI (HDCP2.2)
I OUT
CP2.2)
1 AV 1 AV 2 AV 3 AV 4 AV 5 AV 6
ARC (1 BD/DVD)
AV 3 AV 4 COMPONENT VIDEO TRIGGER
AV 1
Y P B P R
A
12V
MAX. TOTAL
B
Y AV 2 P B P R
ZONE OUT/PRE OUT PRE OUT (SINGLE) (FRONT)
1
2
ZONE 2/ ZONE 3/ (REAR)
FRONT SURROUND SUR. BACK CENTER
6 OPTICAL F.PRESENCE R.PRESENCE SUBWOOFER
SPEAKERS
EXTRA SP2
R SURROUND L R L R
SURROUND BACK R.PRESENCE
A
AM
SINGLE
ZONE 2/ZONE 3/F.PRESENCE
If you select the input source by pressing AV 1-7 on the remote control, the video/audio played
back on the video device will be output from the unit.
44
En
HDMI (AV 1-7) jacks
NE
AV 7
OUT
1
REMOTE
0.1A
IN OUT HDMI output
2
HDMI
HDMI
HDMI
L CENTER
Video device