Connecting Audio Recording Devices; Connecting The Power Cable - Yamaha RX-S600 Owner's Manual

1 2 3 4 5 6 7 8 9 10
7

Connecting audio recording devices

You can connect audio recording devices to the AUDIO OUT jacks. These jacks output
analog audio signals selected as the input.
• To copy audio from an audio device, connect the audio device to the AV 4–5 jacks, AUDIO 2 jacks, or
VIDEO AUX (AUDIO) jacks of the unit.
• Be sure to use the AUDIO OUT jacks only for connecting recording devices.
The unit (rear) AUDIO OUT jacks
HDMI ARC (BD/DVD) HDMI 1 HDMI 2 HDMI 3
OUT
AUDIO OUT
ANTENNA
AV 4 AV 5
(RADIO)
A
OPTICAL CONPONENT Y P B P R VIDEO
VIDEO
AV 1
AUDIO 2 AUDIO OUT
COAXIAL
AV 2
COAXIAL AUDIO 1
AV 3
(TV)
VIDEO
Audio input
L
L L
R
R R
Audio recording
AUDIO
device
8

Connecting the power cable

Before connecting the power cable (General model only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V, 50/60 Hz.
• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC
wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a
potential fire hazard.
VOLTAGE SELECTOR
The unit (rear)
SPEAKERS
EXTRA SP
T CENTER
SURROUND / ZONE 2
/BI-AMP
After all the connections are complete, plug in the power cable.
The unit (rear)
SPEAKERS
EXTRA SP
T CENTER
SURROUND / ZONE 2
/BI-AMP
PREPARATIONS ➤ Connecting audio recording devices
VOLTAGE
SELECTEOR
110V 220V
120V 240V
To an AC wall outlet
30
En