Connecting Front Speakers That Support Bi-Amp Connections; Connecting Zone2 Speakers - Yamaha RX-S600 Owner's Manual

1 2 3 4 5 6 7 8 9 10
■
Connecting the subwoofer
(with built-in amplifier)
Use an audio pin cable to connect the subwoofer.
Audio pin cable
Connecting front speakers that
support bi-amp connections
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND/ZONE 2/BI-AMP jacks.
To enable the bi-amp function, set "Power Amp Assign"
(p.81) in the "Setup" menu to "BI-AMP" after connecting
the power cable to an AC wall outlet.
The unit (rear)
SPEAKERS
EXTRA SP
FRONT CENTER
SURROUND / ZONE 2
/BI-AMP
1 2
3
9
• The FRONT jacks and SURROUND/ZONE 2/BI-AMP jacks output
the same signals.
Caution
• Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. If you are not
making bi-amp connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
• Surround speakers cannot be used during bi-amp connections.

Connecting Zone2 speakers

The Zone2 function allows you to playback an input
source in the room where the unit is installed (main
zone) and in another room (Zone2). To connect the
Zone2 speakers, see "Playing back music in multiple
rooms" (p.70).
PREPARATIONS ➤ Connecting speakers
17
En