Yamaha RX-S600 Owner's Manual page 87

■
Volume
Configures the volume settings.
❑ Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Maximum (default) Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low
volumes.
Min/Auto
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
❑ Main Zone Max Volume
Sets the main zone maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
❑ Main Zone Initial Volume
Sets the main zone initial volume when the receiver is turned on.
Settings
Sets the level to the volume level of the unit when it last entered
Off (default)
standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
Sets the level to the specified volume level.
(0.5 dB increments)
❑ Zone2 Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
• This setting is available only when "Power Amp Assign" (p.81) is set to "Zone2".
❑ Zone2 Initial Volume
Sets the Zone2 initial volume for when the Zone2 is turned on.
Settings
Sets the level at the volume level of the unit when it last entered
Off (default)
standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
Sets the level to the specified volume level.
(0.5 dB increments)
• This setting is available only when "Power Amp Assign" (p.81) is set to "Zone2".
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
87
En