Download Print this page

Advertisement

MODELS

OPTIONS

Replacing soundproof cover with paper table is
required when SF940 is installed in front side.
SF940 single-bin feeder (front).
User's Manual
Power Supply type; 100-120VAC input (M33325A)
Interface type; Centronics parallel + USB interfaces
Centronics parallel + RS232C serial interface
Control panel type; LED type.
Printer add-on options are listed below. For details, see Chapter 8.
Cut sheet feeder. The SF940 single-bin feeder is available as an
option. Two cut sheet feeders can be installed in front of and behind
the printer at the same time. A cut sheet feeder allows single cut
sheets and multiple-part cut sheets to be fed automatically.
Tractor unit. A second tractor unit may be bought as an additional
option if dual tractor feeding capability is required.
LAN card. A LAN card is available as a printer add-on option. A
user installable function, the LAN card can be installed only on
printer models with the Centronics parallel + USB interfaces. For
details, see Chapter 8.
Slot for LAN card is available.
(Centronics parallel + USB interfaces MODEL)
OPTIONS of DL7600 dot matrix printer
220-240VAC input (M33325B)
LCD type.
Replacing stacker with large stacker is required
when SF940 is installed in rear side.
SF940 single-bin feeder (rear).
Tractor unit (rear)
INTRODUCTION
1-3

Advertisement

   Also See for Fujitsu DL7600

   Related Manuals for Fujitsu DL7600

   Related Content for Fujitsu DL7600

Comments to this Manuals

Symbols: 0
Latest comments: