Fujitsu DL7600 User Manual page 36

SETTING UP
2-6
2
Close the sound proof cover.
Lower the soundproof cover as shown in the figure below (1), then
push (2) and close (3) the cover.
(2)
(1)
The complete setup conditions are shown below. Make sure that the top
end of the soundproof cover is engaged with the printer guide pin and the
guide pin on the soundproof cover is inserted into the cover groove.
Guide pin (metal stud)
NOTE
Do not apply unreasonable force while you are handling the
soundproof cover. It could cause damage. Also, do not leave the
soundproof cover in incomplete setting. Running the printer with
the soundproof cover left in incomplete conditions could cause a
paper jam.
(3)
Cover groove.
Soundproof cover guide pin
User's Manual