7. Adjust the vertical print alignment at high draft speed.
Press the "TEAR OFF" button to switch from draft speed to
high draft speed.
Examine the parallel bars and adjust the vertical print alignment
as described in step 3.
Press the HI IMPACT button to enter Hi Impact mode. Make
8. Exit the V-ALMNT function.
Press the ONLINE button to exit the V-ALMNT function and
save the new vertical alignment settings. The printer exits setup
mode and returns online.
To exit the V-ALMNT function, you must exit setup mode.
Correct vertical print alignment
The following flowchart shows how setup mode is organized for the
Fujitsu DPL24C PLUS emulation. Differences in the IBM Proprinter
XL24E and Epson ESC/P2 emulations are summarized after the
USING SETUP MODE