Loading Continuous Forms (Rear Feed) - Fujitsu DL7600 User Manual

Paper Holder
User's Manual

Loading Continuous Forms (Rear Feed)

A tractor is supplied as standard and is attached to the front of the printer.
It can be attached to the rear of the printer. You can also buy a tractor
unit as an additional rear tractor unit.
A maximum of 8-ply media can be fed from the rear tractor unit.
For reinstalling the tractor unit for rear feed, see page 2-10 to 2-13.
1. Release the tractor locking levers by pulling them up(①). Open
the tractor paper holders. See the following figure(②).
2. Position the tractors and center guide.
3. Fit the paper feed holes onto the left and right tractor pins.
Adjust the right tractor to the width of the form. Close the paper
holders.
Locking Levers
PAPER HANDLING
Paper Holder
3-15