Cutter Deck Cleaning; Cutter Deck Installation - Honda H5013 Owner's Manual

5. Cutter deck cleaning
m
To prevent injuries, be sure to wear heavy gloves when clean-
ing the cutter deck.
-
1. Remove the cutter deck from the tractor (see page 47).
-
2. Remove the five 8 mm nuts, and remove the right and left pulley
covers.
-
3. Remove grass and other foreign matter from inside the covers.
-
4. Turn the cutter deck upside down, and clean off accumulated grass
and other debris.
- 5. Reinstall the belt covers, and install the cutter deck on the tractor.
6. Cutter deck installation
To install, reverse the removal procedure.
NOTE: Before atempting to install the cutter deck, lower the lift arm and
then push it with your hand to be sure it is all the way down.
49