Table of Contents
Advertisement
3. Cutter deck height adjusting lever
This lever is used to raise and lower the cutter deck. To adjust the cutting
height,
squeeze the handle lock and then press in and hold the set button.
Raise or lower the lever until the desired cutting
height appears on the in-
dicator. At that pointi release the set button and the handle lock. Be sure the
handle lock returns to its normal position when released.
Cutting heights:
1.5, 2.0, 2.5,
3.0, 3.5, 4.0 in.
CAUTION:
l
To avoid damage to the cutter deck, always raise it fully when driving the
lawn tractor to and from the mowing area; this provides maximum ground
clearance.
l
To avoid damaging or disabling the handle locking mechanism,
never at-
tempt to screw the adjusting lever's set button in or out.
SET BUTTON
4. Power Take-Off
(P.T.O.1 lever
This lever engages
and disengages
the power take-off
clutch to drive the
blades.
Lever positions:
ON (Engaged) . . . . . . . . . :. . . . . .Blades turn
OFF (Disengaged)
. . . . . . . . . ..Blades stop
OFF(Disengaged)
P.T.O. LEVER
NOTE:
An interlock
switch
prevents
the engine
from starting
unless the
P.T.O.
lever is in the OFF position.
11
Hide quick links:
Advertisement
Table of Contents
