Honda H5013 Owner's Manual page 25

- 3. Position the. V belt driven stopper (belt stopper A) on the frame and
install using 10 x 20 mm flange bolt and 8 x 16 mm flange bolt.
Tighten the bolt to the specified torque.
Torque specifications:
10 mm flange bolt:
4.0 kg-m (29 ft-lb)
8 mm flange bolt:
2.2 kg-m (16 ft-lb)
V-BELT DRIVEN STOPPER
(BELT STOPPER A)
FLANGE BOLT
\ \
I/
- 4. Install the P.T.O. clutch lever (belt stopper B) bolt on the frame.
Tighten the bolt to the specified torque.
Torque specification: 2.2 kg-m (16 ft-lb)
P.T.O. CLUT-CH LEVER BOLT
(BELT STOPPER B)
23