Honda H5013 Owner's Manual page 19

- 3. Slide the right and left link pivots in the holes in the frame from the
inside, and install using three 8 x 20 mm flange bolts for each pivot.
Slide the lift link shaft through the holes in the pivots as shown.
Recommended Grease: Multipurpose Grease
LIFT LINK
SHAFT
FLANGE BOLTS
Bx20mm
LIFT LINK PIVOT
- 4. Slide the lift link assembly onto the lift link shaft on the main frame,
and install the lock washer over the end of the lift link shaft. Insert
the pin through the end of the lift link shaft and secure with the lock
pin. Insert the end of the deck lift rod through the hole in the lift link.
Install the lock washer over the end of the deck lift rod and insert the
lock pin through the end.
Slide the lift link pivot through the lift link rod and install the lock
washer over the end of the lift link pivot. Insert the split pin through
the end and bend the legs away from each other. Lubricate the lift
link pivot with grease, then insert the threaded end of the lift link
pivot through the front link arm and install the lock nut on the end of
the pivot. Tighten the lock nut securely.
LOCK NUT
LIFT LINK SHAFT
OCK WASHER
SHAFT PIN
FRONT LINK
ARM
ROD
LIFT LINK
DECK LIFT dOD
ASSEMBLY
17