Honda H5013 Owner's Manual page 16

- 3. Install the drive pulley on the front P.T.O. shaft using an 8 x 20 mm
special flange (shouldered) bolt. Tighten the bolt to the specified
torque.
Torque specification: 2.2 kg-m (16 ft-lb)
SPECIAL FLANGE
BOLT 8 x 20 mm
- 4. Position the front tensioner bracket on the frame and install using
four of the bolts removed in Step 2. Tighten the bolts to the specified
torque. Retain the remaining two bolts.
Torque specification: 2.2 kg-m (16 ft-lb)
FLANGE BOLTSBx16mm
14
FRONT TENSl6NER BRACKET