Honda H5013 Owner's Manual page 53

I Blade installation
- 1. Clean dirt and grass from the blade, blade holder, and the inside of
the cutter deck.
- 2. Install the blade holder, blade, washer, and blade bolt.
1 IMPORTANT NOTICE 1
l
Be sure the blade is properly aligned with the blade holder before
tightening the blade bolt. Do not allow.the blade to overlap the edge of
the holder.
l
Install the washer with the side marked "INSIDE" facing the blade.
l
The blade bolt and washer are specially designed for this application
and must not be replaced with any other bolt or washer.
- 3. Hold the blade firmly, and tighten the blade bolt to a torque value of
6.0 kg-m (43 ft-lb).
51