Installing Mower; Loose Parts - Honda H5013 Owner's Manual

4. INSTALLING MOWER
l
The rotary mower should be installed by an authorized Honda dealer
unless the owner has proper tools and feels he is mechanically
qualified.
l
To prevent accidental start-up, remove the ignition switch key, and
disconnect the spark plug cap before installing the mower.
Install with the tractor on level ground.
Lock the parking brake, set the transmission lever in "N" (Neutral) and the
front and rear P.T.O. levers in the "OFF" positions.
1. Loose parts
The parts carton contains the following loose parts. Before assembling the
rotary mower, check for any missing or damaged parts.
LIFT LINK SHAFT
CUTTER DECK LIFT ROD
@ PLAIN WASHER
LEFT CUTTER DECK LIFT
ARM
-8 FLANGE BOLT
Bx20mm
SPZT PIN LIFT ARM
PIN
RIGHT LIFT ARM
gyo:'NK,, Q
LOCK WASHER
1
1 FRONT TENSIONER BRACKET 1
FRONT P.T.O. ASSEMBLY
(Front Tensioner)
ARD
SPRING
63
@= t
Ic.0
Q!
FLANGE BOLT
FRONT HITCH PIVOT A
B
DRIVE PULLEY SPECIAL FLANGE
BOLT
11