Table of Contents
Advertisement
MOON 700i Dual-Mono Integrated Amplifier
Software Setup
The MOON 700i integrated amplifier includes powerful software that allows you to configure it to meet your specific needs.
For each of the five (5) inputs, you can assign a
maximum volume
level of less than 80.0dB, create an
volume control (to exclusively use the source component's volume instead) and
use. As well, you can assign any and all inputs to activate the 700i's
and change the IR code set for use with a universal remote control. Finally, there's a facility to reset all software settings
back to their factory defaults. Please refer to the accompanying quick reference diagram for a snapshot of the entire Setup
menu layout.
When you are in Setup mode, there are five (5) front panel items used to program this integrated amplifier; The "Setup"
button for navigating up and down through the various menu levels, the rotary volume control for scrolling through the
available choices within each programmable item, and the "OK" button for confirming and saving your selections.
What follows are step-by-step examples of how to configure an input, assign the 12 Volt trigger and reset the software back
to the factory default. We will begin by walking through all 5 available options for the "B1" input:
1
To enter the Setup mode, begin by pressing the "Setup" button; "SETUP" will appear in the display window.
2
Rotate the volume control clockwise until "INPUTS" appears in the display. Press "OK".
3
Rotate the volume control clockwise until "B1" appears in the display. Press "OK".
4
"LABEL" will appear in the display. Press "OK".
5
"AUX1" will appear in the display. By rotating the volume control clockwise, you will scroll through more than 25
generic choices appearing in alphabetical order (AUX ... CD ... TUNER, etc.), various MOON source model names
(i.e. ANDROMEDA ... 750D, etc) and finally a choice called "CUSTOM" which allows you to create your own text
label of up to 8 characters in length (refer to the example at the end of this section for more details).
If you assign the ''B1' input label to "MiND" (for the
also automatically configuring this component's internal software which will allow it to operate with the MiND app,
provided that the proper SimLink connections have been made with your other MOON components. Functions
available using the MiND app are discussed in the next section.
6
When the label name you wish to assign to the B1 input appears in the display, press the "OK" button. "SAVED"
will briefly appear in the display followed by "LABEL".
7
Press the "Setup" button and the label you've just assigned to the B1 input will appear in the display.
8
At this point you can (i) continue configuring other options for the B1 input (see the next step), (ii) configure
another input such as S1 (rotate the volume control clockwise to access the S1 input), or (iii) leave the Setup
mode (press the "Setup" button once and "INPUTS" appears in the display; the press it again and "EXITING" will
appear in the display).
9
The next option to configure for the B1 input is the maximum volume setting. Press "OK" and "LABEL" will appear
in the display. Then slowly rotate the volume control clockwise until "MAX VOL" appears in the display. Press
"OK" and the factory default of "80.0dB" will appear in the display; this is the maximum volume level.
10
The maximum setting can be changed by rotating the volume control. A slow rotation makes 0.5dB adjustments
and a faster rotation results in 1.0dB adjustments. Once you've found a desired setting, press "OK" and "SAVED"
will briefly appear in the display followed by "MAX VOL". The lowest possible setting is 40.0dB.
11
The next option to configure for the B1 input is volume offset. This allows you to compensate for the different
output levels amongst your various source components you will be connecting to the 700i. Slowly rotate the
volume control clockwise and "OFFSET" will appear in the display. Press "OK" and the factory default of "+6.0dB"
will appear in the display.
12
You can adjust the volume offset in either 0.5dB (slow rotation) or 1.0dB (faster rotation) increments to either
+10.0dB by rotating the volume control clockwise or –10.0dB rotating the volume control counter-clockwise. Once
you've found the appropriate setting, press "OK" and "SAVED" will briefly appear in the display the "OFFSET".
____________________________________________________________________________________________________
Software Setup
label
to replace the factory assigned name (i.e. B1, S1, etc.), assign a
offset volume
level ranging from –10.0dB to +10.0dB,
12 Volt trigger
MOON intelligent Network Device
disable
the input completely when it's not in
, disable the front panel infrared sensor
music streamer), you are
bypass
the
9
Advertisement
Table of Contents
