Table of Contents
Advertisement
MOON 700i Dual-Mono Integrated Amplifier
SimLink™
The SimLink™ provides communication features between various MOON components. For example, if you were to connect
the 750D CD Player to the 700i Integrated Amplifier via the SimLink™, pressing the
cause the integrated amplifier to automatically switch to it's designated input for the CD Player.
with the name
"750D
window using the "Display" button on the 700i, the brightness level of the 750D's display will automatically adjust to the
same brightness level as that of the 700i. Conversely, since the SimLink™ is a true bi-directional connection, adjusting the
750D's brightness level will automatically adjust the brightness level of the 700i.
A third feature of SimLink™ involves the "Standby" function. By pressing down and holding the "Standby" button for 2
seconds on the 700i, all other MOON components connected via the SimLink will go into "Standby" mode along with the
700i. The same logic applies when switching from "Standby" to active mode.
The connection rules for the SimLink™ are very basic. You must always connect the supplied cable between one component's
"SimLink™ Out" jack and another component's "SimLink™ In" jack. If you inadvertently connect the cable between either two
"SimLink™ In" or two "SimLink™ Out" jacks, the SimLink™ communication feature will not function. Also, there is no master
component in a SimLink™ chain; no one particular component operates as the main communications controller.
In the event that you are using your MOON 700i with an older MOON product such as a SuperNova, you will need to update
the software of the older product to allow for complete SimLink™ functionality. Contact your retailer for further details.
Operating the 700i
We recommend that you leave your MOON 700i dual-mono integrated amplifier powered up at all times to maintain optimal
performance. In the event that you plan to be away from your home for a few days, powering off the integrated amplifier
may not be a bad idea. Once fully "broken-in", please keep in mind that your 700i will require several hours of playing time
before it reaches its peak performance after you've powered it up again.
Turning on your MOON 700i for the first time
Prior to turning this integrated amplifier on for the first time, make sure that every cable is properly connected to avoid any
problems. Then turn on your integrated amplifier in the following manner:
1)
Flick the main rocker switch labeled "POWER" to the '1' (on) position on the rear of the controller chassis.
2)
Press the push button labeled "Standby" on the 700i, the blue LED's on both chassis' will confirm operation and
the digital display will illuminate. You are now ready to begin listening to music.
On and Off Sequence
To avoid having any annoying noises (ie. "thumps" and "pops") emanate from your speakers when powering your 700i on or
off, you should
1)
Always power up your 700i integrated amplifier affer powering up your source component(s).
2)
Always power down your 700i before powering down your source component(s).
____________________________________________________________________________________
SimLink™ / Operating The 700i
" for this feature to work
. If you were to adjust the brightness level of the large digital display
(play) button on the 750D would
You must assign the input
14
Advertisement
Table of Contents
