Configuration
Alarm In Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site when certain events are
activated.
1.
2.
Rev 3.01
Figure 3-33
Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
Highlight the Notify box and then press # . This toggles between On and Off.
When it is On, the DVR notifies the remote site when certain events occur based
on a defined schedule.
Note
For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Alarm In Event Action (Notify) Setup Screen
52
Document 900.0258
10/05