Configuration
The menu choices are described as follows:
Menu choice
Close this menu
Select Current Blocks
Clear Current Blocks
Select All Blocks
Clear All Blocks
Reverse All Blocks
Exit Zone Setup
Alarm Out Setup Screen
Use the Alarm Out setup screen to establish a schedule for each alarm output from the
DVR. Highlight Alarm Out from the Device menu (MENU
then press # . The Alarm Out Setup screen displays.
1.
Rev 3.01
Table 3-3
Description
Closes the menu so that you can see the entire screen.
Activates highlighted blocks to detect motion.
Deactivates highlighted blocks so that they will not detect
motion.
Activates all blocks to detect motion.
Deactivates all blocks so that they will not detect motion.
Activates inactive blocks and deactivates active blocks.
Asks you to confirm changes and then returns to the previous
screen.
Figure 3-23
To give each alarm output its own title, highlight the box under the Title heading
and then press # . A virtual keyboard displays (see
enter the title.
Motion Detection Zone Choices
Alarm Out Setup Screen
41
Device
Alarm-Out) and
Figure
3-7) allowing you to
Document 900.0258
10/05