Viewing The Display On A Projector Or Monitor - Gateway Notebook Reference Manual

Viewing the display on a
projector or monitor
You can use your notebook for giving presentations by
connecting an external monitor or projector to your monitor
(VGA) port. In addition, if you have the optional port replicator,
you can connect a monitor or projector using a DVI port. Your
notebook supports simultaneous LCD and external display.
Simultaneous display lets you control the presentation from
your notebook at the same time as you face your audience.
To use a projector or external monitor:
1
2
3
4
5
6
54
CHAPTER 4: Using Drives and Accessories
Turn off your notebook.
Plug the projector or monitor cable into the monitor
port on your notebook or optional port replicator.
Tip
For the location of the monitor port on an optional port replicator,
see the port replicator user guide.
Turn on your notebook.
Plug the projector's or monitor's power cord into an
AC power source and turn it on.
Windows recognizes the new hardware and the New
Display Detected dialog box opens.
Select the options for the projector or external monitor,
then click OK.
Press F +F4 to switch between viewing the display on
N
the LCD panel, viewing the display on the projector or
monitor, and viewing the display on both the LCD panel
and the projector or monitor.
Important
If an external monitor or projector is connected and you close
the LCD panel, your notebook may turn off the LCD panel, but will not
enter Sleep mode.