Follett E7CI100A Installation, Operation And Service Manual page 19

Service
(continued) –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
7. Install compression nozzle:
§ Remove and inspect compression nozzle O-ring seal.
Replace if damaged in any way.
§ Clean O-ring groove. Lubricate O-ring with Petro-gel and
reinstall.
§ Install compression nozzle (Fig. 26.1).
§ Install compression nozzle retainer (Fig. 26.2).
§ Install M6 socket head allen screw (Fig. 26.3).
8. Install transport tube (Fig. 27.1).
9. Tighten hose clamp (Fig. 27.2).
10. Install gear motor:
§ Install main housing insulation (Fig. 28.1).
§ Slide gear motor onto auger shaft (Fig. 28.2).
§ Install two M6x90 allen screws (Fig. 28.3).
Fig. 26
Fig. 27
Fig. 28
3
3
Dispenser and Ice machine E7CI100A/E7FS100A
3
2
1
2
1
1
2
19