Table of Contents
Advertisement
System Information Menu
The System Information Menu displays the Firmware Version of the monitor, and offers a Factory Reset
option, which will return all the settings of the monitor to the factory defaults.
To reset the monitor press the ENTER button, then press the up/down button so that Factory Reset is
highlighted, and then press ENTER again to highlight the options column.
Use the UP / Down button to select Yes from the options and then press ENTER to reset the monitor. After a
few seconds the monitor will be reset.
This page also offers the ability to change the HDMI format between YUV and RGB.
This page also offers 4 settings for Colour Temperature. The default is 6500K but this can be changed to
7500K, 9300K or a USER defined setting based on Red, Green and Blue values.
31
Advertisement
Table of Contents
