Table of Contents
Advertisement
System Configuration Menu
Menu and Navigation
Press the MENU button in the Function section of the HS-2000's keyboard to enter the System Configuration
Menu. The menu will be displayed on the HS-2000's Multi Preview output as below.
Press the UP, DOWN, LEFT and RIGHT arrow buttons to highlight or select a menu option. Then use the UP
and DOWN arrow buttons to change the value of the selected item or option. Press the ENT button to Enter
and save your chosen value for the selected menu item.
USER'S PROFILE
-
Press the MENU button and highlight the USER'S PROFILE option.
-
Press the arrow RIGHT button and select a profile number by using the UP and DOWN arrows.
-
Press the ENT button to confirm the chosen profile number to be used.
The current user will also be confirmed between PREVIEW and PROGRAM windows on the Multi
Preview Display.
-
Up to 6 User Profiles can be configured and saved. These profiles are numbered 0 ~ 5.
-
User's Profile 0 is also referred to as the BASIC or MASTER USER settings profile.
If there are settings that will be common to all user profiles 1 ~ 5 then they are set here first under
BASIC and then these common settings can be copied to the other user profiles (1 ~ 5) by selecting
LINK TO BASIC. Then while adjusting USER 1 ~ 5, you can refer to the BASIC settings, thus
avoiding multiple and repeated adjustments for all remaining user profiles.
-
Any changes made to the HS-2000's configuration will be saved to the currently selected profile.
-
The default user profile at Power On is the last selected profile used.
INPUT SETTINGS
-
Press the MENU button and highlight the INPUT SETTINGS option.
-
Press the arrow buttons to select an item and press the ENT to confirm the setting.
-
BRIGHTNESS: adjustment range from -7 to +7
-
CONTRAST: adjustment range from -7 to +7
-
SATURATION: adjustment range from -7 to +7
-
MASTER USER SETTING: When selected, the values for the above are copied from the BASIC
profile.
15
Advertisement
Table of Contents
