Ir Code Confi Guration - Gefen GTV-HDMI1.3-441 User Manual

If you are experiencing IR confl icts, you can change the IR Code of the remote
and switcher. You can do so by holding the EQ button down for 5 seconds and
wait for the LED's to fl ash in front of the unit. The LED's will fl ash the current IR
channel. (One fl ash for channel 1, two fl ashes for channel 2, etc.) Press the Input
button to select which IR Code channel you wish to use. Press the EQ button to
fi nish. Using the guide below, make sure that the unit and remote are both set
to the same channel. If this does not work, please call Gefen's tech support for
further assistance.
Remote
IR CODE CONFIGURATION
How to Resolve IR Code Confl icts
Remote Channel 1:
Remote Channel 2:
Remote Channel 3:
Remote Channel 4:
6
1 2
1 2
1 2
1 2