Auto Pc Adjustment - Christie LX1000 User Manual

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
The Auto PC adjustment function can be operated
directly by pressing the AUTO PC button on the remote
control or the AUTO PC ADJ. button on the side control.
Menu Operation
Auto PC adj.
Press the MENU button to display the On-Screen Menu.
1
Use the Point
to the PC Adjust Menu icon.
Use the Point
2
to the AUTO PC adj. icon and then press the SELECT
button twice.
To store the adjusted parameters.
The adjusted parameters from the Auto PC Adjustment can be stored in
the projector. Once the parameters are stored, the setting can be done
just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC
ADJUSTMENT on pages 36-37 .
Note:
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
buttons to move the red frame pointer
buttons to move the red frame pointer
Computer Input
Remote Control
Side Control
PC ADJUST MENU
PC Adjust Menu icon
Move the red frame pointer to the Auto PC
adj. and press the SELECT button twice.
"Please wait... " appears while the Auto PC
adjustment is in process.
AUTO PC button
AUTO PC ADJ.
button
35