Remote Controller Service Mode - Daikin FCQ18PVJU Service Manual

SiUS28-902_a
2.5

Remote Controller Service Mode

How to Enter the
Service Mode
Service Mode
1. Select the mode No.
Set the desired mode No. with the
Operation
(For wireless remote controller, Mode 43 only can be set.)
Method
2. Select the unit No. (For group control only)
Select the indoor unit No. to be set with the time mode
3. Make the settings required for each mode. (Modes 41, 44, 45)
In case of Mode 44, 45, push the
(LCD "code" blinks.)
For details, refer to the table in next page.
4. Define the setting contents. (Modes 44, 45)
Define by pushing the timer
After defining, LCD "code" changes blinking to ON.
5. Return to the normal operation mode.
Push the
Troubleshooting
button.
button.)
button to be able to change setting before setting work.
button.
button one time.
Troubleshooting by Remote Controller
. (For wireless remote controller,
76