Installing Driver For Windows 2000/Xp - Advantech FPM-3060G Series User Manual

B.3 Installing Driver for Windows 2000/XP
The touchscreen has drivers for Windows 2000 and Windows XP. You
should read the instructions in this chapter carefully before you attempt
installation.
Note 1:
Note 2:
Before installing the Windows 2000/XP driver software, you must have
the Windows 2000/XP system installed and running on your computer.
If you have an older version of the Fujitsu Windows 2000/XP driver or
any touch screen driver provided by other companies installed in your
system, please remove it first. Follow the steps below to install the Fujitsu
Windows 2000/XP driver.
FPM-3060G-R
Insert the Driver CD-ROM. Go to:
\TouchScreen-DRV\Fujitsu_RS-232\Windows Driver\. Click setup.exe.
FPM-3060G-U
Insert the Driver CD-ROM. Go to:
\TouchScreen-DRV\Fujitsu_USB\Windows Driver\. Click TPsetup.exe.
The following windows illustrations are examples
only. You must follow the flow chart instructions
and pay attention to the instructions which then
appear on your screen.
Install the HMI CD Driver into the system
CD-ROM (D:\ means CD-ROM)
17 Appendix B