Advantech FPM-3060G Series User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Industrial Monitor
  5. FPM-3060G Series
  6. User manual

Advantech FPM-3060G Series User Manual

Flat panel monitor with 6" color tft/lcd display
Hide thumbs Also See for FPM-3060G Series:
Table of Contents

Advertisement

Quick Links

Download this manual
FPM-3060G
Flat Panel Monitor with
6" Color TFT/LCD Display

User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FPM-3060G Series and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech FPM-3060G Series

Summary of Contents for Advantech FPM-3060G Series

  • Page 1: User Manual

    FPM-3060G Flat Panel Monitor with 6" Color TFT/LCD Display User Manual...
  • Page 2 No part of this manual may be reproduced, copied, translated, or transmit- ted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd., assumes no responsi- bility for its use, nor for any infringements upon the rights of third parties which may result from its use.
  • Page 3 Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or...
  • Page 4 • Increase the separation between the equipment and the receiver • Connect the equipment to a power outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help FPM-3060G User Manual...
  • Page 5 Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
  • Page 6 The sound pressure level at the operator's position according to IEC 704- 1:1982 is no more than 70dB(A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. FPM-3060G User Manual...

  • Page 7: Table Of Contents

    Panel Mounting .............. 9 Figure 2.2:Panel Mounting ..........9 2.1.3 Swing-ARM (Standard VESA ARM) ......9 Figure 2.3:Swing-ARM for the FPM-3060G series ..9 Power Adapter..............10 Mounted with MBPC-200 or UNO-2000 series .... 10 2.3.1 Mounted with MBPC-200 Series ......... 10 2.3.2...
  • Page 8 C.1.9 Language Menu ............42 C.1.10 OSD Manager .............. 43 C.1.11 Auto Configuration Menu ..........44 C.1.12 Mode Information Menu ..........45 C.1.13 Memory Recall Menu ..........46 C.1.14 Exit Menu ..............47 FPM-3060G User Manual viii...
  • Page 9 Introduction This chapter includes: • Introduction • Specifications • LCD Specification • Power Consumption • Connectors • Dimensions...

  • Page 10: Chapter 1 Introduction

    Chapter 1 Introduction 1.1 Introduction Advantech's FPM-3060G Series consists of 6" color TFT LCD flat panel monitors built specifically for industrial applications. With the optional touchscreen, the FPM-3060G Series is an user-friendly system control interface. In addition to its usual application as an LCD panel monitor, the FPM- 3060G Series comes standard with Direct VGA control signal input, mak- ing it compatible with industrial PCs and workstations.

  • Page 11: Lcd Specifications

    Touchscreen (Optional) • Type: 4 wire, analog resistive • Light Transmission: >80% • Controller: RS-232 interface (for FPM-3060G-RXX version) or USB 1.1 (for FPM-3060G-UXX version) • Power Consumption: FPM-3060G-RXX:+5 V @ 200 mA FPM-3060G-UXX:+5 V @ 100 mA (USB bus power) •...

  • Page 12: Connectors

    This connector connects to the DC 12V Switching Power Supply. Warning: Before you connect a VGA cable between FPM-3060G and a PC, please note the following issues. 1. If you have installed a operating system in the PC, make sure the ver- tical frequency is within the acceptable range.

  • Page 13: Dimensions

    1.6 Dimensions Figure 1.1: FPM-3060G Chassis Dimensions Chapter 1...
  • Page 14 FPM-3060G User Manual...
  • Page 15 System Setup • Mounting the Monitor • Wall / Panel / VESA Arm Mounting • Mounting with MBPC-200 or UNO-2000 Series...

  • Page 16: Chapter 2 System Setup

    Chapter 2 System Setup 2.1 Mounting FPM-3060G The FPM-3060G Series can be flexibly mounted. The versatility of the FPM-3060G enable it to be mounted almost anywhere. 2.1.1 Wallmounting Please refer to figure 2.1 and follow the steps below to install FPM- 3060G on a wall.

  • Page 17: Panel Mounting

    2.1.2 Panel Mounting Refer to figure 2.2 and follow the instructions below to install in a panel. Place six panel-mounting brackets on FPM-3060G (2 on the top, 2 on the left, and 2 on the right). Fasten the six panel-mounting brackets with screws.

  • Page 18: Power Adapter

    2.2 Power Adapter The power adapter bracket is attached to the rear of FPM-3060G. Attach/ detach the power bracket at the rear side of the monitor by screwing/ unscrewing the four screws. 2.3 Mounted with MBPC-200 or UNO-2000 series FPM-3060G can easily be combined with products in the MBPC-200 or UNO-2000 series.
  • Page 19 Display Timing Mode...

  • Page 20: Appendix A Display Timing Mode

    Note 3: Because adjustments may not fit, such as differing magnifying ratios or, in the case that you use it except for the display timing that was preset. FPM-3060G User Manual...
  • Page 21 Touchscreen This appendix contains information on the touchscreen, and its installation.

  • Page 22: B.1 Introduction

    350g load at 2 Hz • Character Activation Life: >100,000 characters written within a 20 mm x 20 mm area on the touch screen. • Chemical resistance: Hard coating is highly resistant to most solvents and chemicals FPM-3060G User Manual...

  • Page 23: Installing Driver For Windows 2000/Xp

    Optical • Visible light transmission: 75% typical (>74% @ 550 nm test) • Clarity: Clear Finish - 25%, Antiglare Finish - 15% Sensor board • Chemical strengthened glass with 4 H hardness standard. (Test condition: ASTM D3363-92A) Ball drop test •...
  • Page 24 When the system first detects the controller board, a screen appears that shows “Unknown Device.” Do not use this hardware wizard. Press Cancel. FPM-3060G-RXE Insert the Driver CD-ROM. Go to: \TouchScreen-DRV\PenMount Driver\DMC 9000 (RS-232) FPM-3060G-UXE Insert the Driver CD-ROM. Go to: \TouchScreen-DRV\PenMount Driver\DMC 5000 (USB) FPM-3060G User Manual...
  • Page 25 The screen displays the installation wizard for the PenMount soft- ware. Click “Next”. Appendix B...
  • Page 26 A License Agreement appears. Click “I accept…” and “Next” The “Ready to Install the Program” screen appears. Select “Install.” FPM-3060G User Manual...
  • Page 27 The next screen is “Hardware Installation.” Select “Continue Any- way.” The “InstallShield Wizard Completed” appears. Click “Finish.” Appendix B...

  • Page 28: Configuring Penmount Windows 2000/Xp Driver

    Advanced Calibration uses 4, 9, 16 or 25 points to effec- Calibration tively calibrate touch panel linearity of aged touch screens. Click this button and touch the red squares in sequence with a stylus. To skip, press ‘ESC’. FPM-3060G User Manual...
  • Page 29 Note: The older the touchscreen, the more Advanced Mode calibration points you need for an accu- rate calibration. Use a stylus during Advanced Calibration for greater accuracy. Appendix B...
  • Page 30 FPM-3060G User Manual...
  • Page 31 Plot Check this function and a touch panel linearity com- Calibration parison graph appears when you have finished Data Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Appendix B...
  • Page 32 Touch the screen with your finger or a stylus and the drawing screen reg- isters touch activity such left, right, up, down, pen up, and pen down. Click Clear Screen to clear the drawing. FPM-3060G User Manual...
  • Page 33 Multiple Monitors Multiple Monitors supports from two to six touch screen displays for one system. The PenMount drivers for Windows 2000/XP support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
  • Page 34 When the mapping screen message appears, click OK. Touch each screen as it displays “Please touch this monitor.” Fol- lowing this sequence and touching each screen is called mapping the touch screens. FPM-3060G User Manual...
  • Page 35 Touching all screens completes the mapping and the desktop reap- pears on the monitors. Select a display and execute the ‘Calibration’ function. A message to start calibration appears. Click OK. “Touch this screen to start its calibration” appears on one of the screens.
  • Page 36 Beep on Pen Down – beep occurs when pen comes down Mode Beep on Pen Up – beep occurs when pen is lifted up Beep on both of Pen Down/Up – beep occurs on both Beep Frequency – modifies sound frequency Beep Duration – modifies sound duration FPM-3060G User Manual...
  • Page 37 About This panel displays information about the PenMount controller and driver version. Appendix B...

  • Page 38: Penmount Monitor Menu Icon

    Right and Left Button functions. Pen Sta- Check this function to reduce cursor vibration for relatively bilizer unstable touch screens, or where there may be excess vibration. Normally this function is not checked. Exit Exits the PenMount Monitor function. FPM-3060G User Manual...

  • Page 39: Penmount Rotating Functions

    B.4.3 PenMount Rotating Functions The PenMount driver for Windows 2000/XP supports several display rotating software packages. Please see Chapter 5 for more information. The PenMount drivers for Windows 95, Windows 98/Me, Windows 2000/XP, as well as Windows 98 USB and Windows Me/2000/XP sup- port display rotating software packages such as: •...

  • Page 40: Uninstall The Penmount Windows 2000/Xp Driver

    Go to Settings, then Control Panel, and then click Add/Remove program. Select PenMount DMC9000 and click the Add/Remove button. Select PenMount DMC9000 and DMC9100. Click the Remove button. Select ‘Yes’ and “Close” to remove the PenMount Windows 2000/ XP driver, and reboot the system. FPM-3060G User Manual...
  • Page 41 OSD Operation Keypad...

  • Page 42: C.1 Overview

    Move the selector to the previous option. Decrease the gauge value of the selected option. Menu/Sel Activate the OSD menu. Enter/confirm the selected option. Auto Automatically adjust the clock, phase, H-position and V-position. C.1.3 LED Functions Green StandBy/OFF Green Blinking No Signals Orange FPM-3060G User Manual...

  • Page 43: Osd Key Functions

    C.1.4 OSD Key Functions Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out.
  • Page 44 • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the Increase the LCD Monitor gauge value of the selected option. Return to last Selected to menu confirm Decrease the gauge value of the selected option. FPM-3060G User Manual...

  • Page 45: Contrast/ Brightness Settings

    • Auto Select Input • ON ‡ start from default setting and scan the inputs by following sequence from ANALOG INPUT, DIGITAL INPUT, S-VIDEO INPUT, and CVBS INPUT. • OFF ‡ start from default setting C.1.5 Contrast/ Brightness Settings • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation...

  • Page 46: Geometry Menu - Dvi Input

    • Recall: Switch the setting change by Rec1 and Rec2 while pressed C.1.6 Geometry Menu – DVI Input Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN FPM-3060G User Manual...

  • Page 47: Color Temperature Menu

    • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the LCD Increase the Monitor gauge value of the selected option. Return to last menu Selected to con- firm Decrease the gauge value of the selected option. C.1.7 Color Temperature Menu Generate Main Menu Select by Left and Right Button, press Menu Button for selection...

  • Page 48: Rgb Color Menu

    C.1.8 RGB Color Menu Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation Select by Left and Right Button, Press Menu Button for selection confirmation FPM-3060G User Manual...
  • Page 49 • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option. Return to last Selected to confirm menu Decrease the gauge value of the...

  • Page 50: Language Menu

    • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the LCD Increase the gauge Monitor value of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. FPM-3060G User Manual...

  • Page 51: Osd Manager

    C.1.10 OSD Manager Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option.

  • Page 52: Auto Configuration Menu

    • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the LCD Increase the Monitor gauge value of the selected option. Return to last menu Selected to con- firm Decrease the gauge value of the selected option. FPM-3060G User Manual...

  • Page 53: Mode Information Menu

    Auto configuration can be set in menu and also can press the without any menu indication. C.1.12 Mode Information Menu Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN •...

  • Page 54: Memory Recall Menu

    • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the Increase the gauge LCD Monitor value of the selected option. Return to last Selected to confirm menu Decrease the gauge value of the selected option. FPM-3060G User Manual...

  • Page 55: Exit Menu

    C.1.14 Exit Menu Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation • Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the LCD Increase the gauge Monitor value of the selected option.
  • Page 56 Don’t remove the HOT KEY until this task is finished. Entry OSD UNLOCK MODE Press HOT KEY, the screen will show this action first Don’t remove the HOT KEY until the screen indicated this task is fin- ished. FPM-3060G User Manual...

This manual is also suitable for:

Fpm-3060g-xaeFpm-3060g-raeFpm-3060g-uae

Table of Contents