Integrated Peripherals - Advantech ARK-3399 User Manual

3.2.5

Integrated Peripherals

Note! This "Integrated Peripherals" option controls the configuration of the
boardís chipset, includes IDE, ATA, this page is developed by Chipset
independent.
OnChip IDE Device
This item enables users to set the OnChip IDE device status, includes enable IDE
devices and setting PIO and DMA access mode, and some of new chipset also sup-
port for SATA device (Serial-ATA).
Onboard Device
This item enables users to set the Onboard device status, includes enable USB,
AC97, MC97 and LAN devices.
Super IO Device
This item enables users to set the Super IO device status, includes enable Floppy,
COM, LPT, IR and control GPIO and Power fail status.
Onboard Serial Port 1
This item allows user to select I/O port of address, Range is from 2E8 to 3F8.
Serial Port 1 Use IRQ
This item allows user to select I/O port of IRQ number. Bios default value is "IRQ4".
Onboard Serial Port 2
This item allows user to select I/O port of address, Range is from 2E8 to 3F8.
Serial Port 2 Use IRQ
This item allows user to select I/O port of IRQ number. Bios default value is "IRQ3".
SP2 AutoFlow Control
Auto flow control is used in RS-485, is used to tristate the transmitter when no other
data is available, so that other nodes can use the shared lines.
When auto flow control is enable, the device monitors the local output buffer for not
empty and empty conditions. If enable, the flow control will force signal to the desired
polarity under the empty or not empty condition.
Watch Dog Timer-Out Value Unit[Minutes]
This item allows user to select watch dog time of value unit with minutes or seconds.
[Press Enter]
[Press Enter]
[Press Enter]
[3F8]
[IRQ4]
[2F8]
[IRQ3]
[Disable]
29 ARK-3399 User Manual