Installing The Lsi 9265-8I Raid Battery - Dell PowerEdge C6145 Hardware Owner's Manual

Figure 3-21. Removing and Installing the LSI 9265-8i RAID Battery
1 LSI 9265-8i RAID battery
3 screw (3)

Installing the LSI 9265-8i RAID Battery

1 Attach the RAID battery onto the RAID battery carrier. See Figure 3-
21.
2 Replace the screws securing the RAID battery. See Figure 3-21.
3 Connect the cable connecting to the LSI 9265-8i card.
4 Install the system-board assembly. See "Installing a System-Board
Assembly" on page 116.
5 Remove the LSI 9265-8i RAID battery assembly from the system-board
assembly. See "Installing the LSI 9265-8i RAID Battery Assembly" on
page 146.
6 Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
148 | Installing System Components
2 LSI 9265-8i RAID battery carrier