Installing The Lsi 9260-8I Raid Battery Carrier - Dell PowerEdge C6145 Hardware Owner's Manual
Hide thumbs
Also See for PowerEdge C6145:
- Hardware owner's manual (183 pages) ,
- Getting started (153 pages) ,
- Using instructions (76 pages)
Table of Contents
Advertisement
Figure 3-16. Removing and Installing the LSI 9260-8i RAID Battery Carrier
1
screw (2)
3
system-board assembly
Installing the LSI 9260-8i RAID Battery Carrier
1
Place the LSI 9260-8i RAID battery carrier in position on the interposer
extender. See Figure 3-16.
2
Replace the screws securing the LSI 9260-8i RAID battery carrier to the
interposer extender. See Figure 3-16.
3
Install the LSI 9260-8i RAID battery into the LSI 9260-8i RAID battery
carrier. See "Installing the LSI 9260-8i RAID Battery" on page 136.
4
Install the system-board assembly. See "Installing a System-Board
Assembly" on page 116.
5
Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
138
|
Installing System Components
2
LSI 9260-8i RAID battery carrier
Advertisement
Table of Contents
Troubleshooting
