Dell PowerEdge C6145 Hardware Owner's Manual page 54

Option
Module Version
Node Count
Core Count
Revision
Cache L1
Cache L2
Cache L3
Speed
Able to Change Freq.
uCode Patch Level
Power Management
Secure Virtual Machine
Mode
(Enabled default)
C1E Support
(Enabled default)
CState Mode
(C6 default)
CPB Mode (Turbo Mode)
(Disabled default)
CPU DownCore Mode
(All default)
ACPI SRAT Table
(Enabled default)
54 | Using the System Setup Program
Description
Displays the current processor module version.
Displays the node count.
Displays the processor core count.
Displays the processor version.
Displays the size of CPU L1.
Displays the size of CPU L2.
Displays the size of CPU L3.
Displays the frequency of CPU.
Displays the capability of frequency change.
Displays the ucode patch level.
This field sets the system Power Management to
Maximum Performance mode, OS Control mode, or
Advanced Platform Management Link mode. When set
to APML mode, you can change setting of PSU Power
Capping options.
Select this item to enable or disable the function of
securing virtual machine mode (SVM).
Select this item to enable or disable the "Enhanced Halt
State".
Specifies the method of C-State enablement. Only for
Family 15h CPU.
Specifies the method of core performance boost
enablement. Only for Family 15h CPU.
Select this item to cold reset the system after options are
changed.
Select this item to enable or disable the building of ACPI
SRAT table.