Lsi 9260-8I Card; Removing The Lsi 9260-8I Card - Dell PowerEdge C6145 Hardware Owner's Manual

LSI 9260-8i Card

NOTE: The LSI 9260-8i card assembly should include the BBU interposer card
which is connected to the RAID battery. The illustrations in this section are just
for your removal and installation reference. For more information of the RAID
battery, see "LSI 9260-8i RAID Battery (Optional)" on page 135.

Removing the LSI 9260-8i Card

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Remove the system-board assembly. See "Removing a System-Board
Assembly" on page 115.
2 Disconnect the two SAS/SGPIO cables connecting to the LSI 9260-8i
card assembly.
3 Remove the three screws that secure the LSI 9260-8i card assembly.
See Figure 3-12.
4 Lift the LSI 9260-8i card assembly out of the system-board assembly.
See Figure 3-12.
Installing System Components | 129