USB Configuration
Scroll to this item and press Enter to view the following screen:
Option
Module Version
USB Devices Enabled
Legacy USB Support
(Enabled default)
USB 2.0 Controller Mode
(Hispeed default)
64
|
Using the System Setup Program
Description
Displays the module version.
Displays USB devices currently detected.
Select this item to enable or disable legacy USB support.
Configure the USB 2.0 controller in HiSpeed (480 Mbps)
or FullSpeed (12 Mbps).
If user uses USB device (Floppy, CDROM) to install
RedHat Linux 9.0, please change USB 2.0 Controller
Mode to FullSpeed to workaround it, because RedHat
Linux 9.0 is not supported completely for hand-off
function.