Dell PowerEdge C6145 Hardware Owner's Manual page 97

Token Setup Option
482A Serial port number
482B Terminal Type
4832 OnChip SATA type
4840 Force USB First
4841 Force USB First
4842 Redirection After BIOS POST
4843 IPMI Detection
4844 IPMI Detection
4856 IOMMU
4857 IOMMU
4858 Secure Virtual Machine Mode
4859 Secure Virtual Machine Mode
485E USB 2.0 Controller Mode
485F USB 2.0 Controller Mode
4860 BIOS EHCI Hand-Off
4861 BIOS EHCI Hand-Off
4866 CPU Power Capping
4867 CPU Power Capping
4868 CPU Power Capping
4869 CPU Power Capping
486A CPU Power Capping
486E PSU Power Capping
486F PSU Power Capping
SATA-AHCI Ports Auto Clk
4871
Ctrl
4872 SATA-AHCI Ports Auto Clk
Description
Console redirection to COM1.
The BIOS console redirection, if enabled,
operates in VT-UTF8 emulation model. See
also tokens BFh, C0h, and D7h.
Onboard SATA controller(s) is set to
AMD_AHCI mode
Disable USB drivers as first boot device.
Enable USB to be the first boot device, the
priority is higher than PXE. It will take
effect on next boot.
The BIOS console redirection, if enabled,
continues to operate until boot loader.
Disable for BMC DUP execute.
Normally, enable IPMI detection.
Disable IOMMU device.
Enable IOMMU device.
Enable Secure Virtual Machine Mode.
Disable Secure Virtual Machine Mode.
Set USB controller mode to Full speed.
Set USB controller mode to High speed.
Enable USB EHCI Hand-Off.
Disable USB EHCI Hand-Off.
Set CPU power state limit to P0.
Set CPU power state limit to P1.
Set CPU power state limit to P2.
Set CPU power state limit to P3.
Set CPU power state limit to P4.
Disable BMC power
control.
Enable BMC power
control.
Disable SATA-AHCI port clock control.
Enable SATA-AHCI port clock control.
Using the System Setup Program | 97
support throttle
support throttle