Socket RS-232 serial User Manual page 9

4. In the Configuration box, the current configuration should be reported
as no configuration loaded. To verify that you have properly connected,
click Get from adapter. The utility should now report the CSA's
firmware version, Bluetooth address and friendly name.
Click
Get from
adapter.
Note:
• If this is your first time using the CSA, the utility will report "new
configuration."
• If you get an error message reporting communications problems,
make sure the CSA is pushed all the way into the serial port, and
make sure you chose the correct COM port in the previous step.
CHAPTER 2: SETUP | 9