Socket RS-232 serial User Manual page 32

• Do not use this unit in medical facilities such as hospitals or in other
places near medical electronic equipment. Likewise, do not attach
medical electronic equipment to the Bluetooth Card.
• Do not use the unit near automatic doors, fire detection devices, or other
automatically controlled devices.
• If the Cordless Serial Adapter gives any electromagnetic interference to
other devices, either remove the CSA from the host device or unplug the
CSA from its power source.
• Do not put the unit in your mouth.
• Do not insert any metal objects such as staples or paper clips into the
unit.
• Do not place the unit in direct sunlight, in a closed car, near a heating
device or any other location where the temperature may become high.
• Do not expose the unit to high levels of dust.
• Do not use the unit near a microwave oven or in areas where there is a
risk of electrical shock, static electricity or electromagnetic interference.
• Do not use the Cordless Serial Adapter in a place with risk of strong
vibration.
• Do not use benzene or paint thinner to clean the Cordless Serial
Adapter.
Antenna Care and Efficient Use
Do not surround your Cordless Serial Adapter with metal since it will
reduce the radio transmission efficiency.
Driving
RF energy may affect some electronic systems in motor vehicles, such as
car stereo, safety equipment, etc. Check with your vehicle manufacturer's
representative to be sure that your Cordless Serial Adapter will not affect
the electronic system in your vehicle.
Aircraft
• Turn off your Cordless Serial Adapter before boarding any aircraft.
• To prevent interference with communications systems, you must not use
your Cordless Serial Adapter while the plane is in the air.
• Do not use it on the ground without permission from the crew.
Radio Frequency Exposure
Your Cordless Serial Adapter is a radio transmitter and receiver. When in
operation, it communicates with a Bluetooth-equipped mobile phone,
mobile computer or other device by receiving and transmitting radio
frequency (RF) magnetic fields in the frequency range 2400 to 2500 MHz.
The output power of the radio transmitter is 0.001 Watt.
32 | APPENDIX B: SAFETY AND USAGE TIPS