Scenario 1: Set Up A Csa Pair For Cable Replacement - Socket RS-232 serial User Manual

SCENARIO 1: Set up a CSA pair for cable replacement.

To set up a pair of Cordless Serial Adapters as serial cable replacement, one
CSA must be an acceptor, and the other an initiator (e.g., in the previous
example, the printer would be acceptor, and the laptop would be initiator).
Set up the Acceptor
1. In the Device role box, select Acceptor. Click Properties.
Select
Acceptor.
2. In the General screen, change the Friendly Name if desired. For example,
you may want to enter a name like "Socket SPP-Acceptor." Note the
Bluetooth Address of this CSA. You will need it to configure the initiator.
If
desired,
change
the
Friendly
Name.
Click
Properties.
Write down
the Bluetooth
Address. You
will need it
while
configuring
the other
CSA.
CHAPTER 2: SETUP | 11