Remote Target (Initiator Only) - Socket RS-232 serial User Manual

Remote Target (Initiator only)

You have two options for
identifying the remote device
(the device you wish the CSA
to connect to):
OPTION 1:
If you know the Bluetooth
Address of the remote device,
simply type it in the Connect
to: field.
OPTION 2:
If you do not know the
Bluetooth Address of the
remote device, perform a
device discovery:
Device Discovery
1. Click on the Filter... button to select the Bluetooth device
and/or service class to discover.
2. Click Discover... The utility will search for Bluetooth devices in range.
3. In the Discovered devices field, click on the Bluetooth address
of the device you wish the CSA to connect to. It should appear
in the Connect to: field.
Note: If you do not know the Bluetooth address of the remote device,
perform the device discovery with the remote device on, then with the
device off, to determine the correct Bluetooth address.
26 | CHAPTER 3: CONFIGURATION UTILITY