Configuration Functions - Socket RS-232 serial User Manual

Configuration Functions

Get from adapter:
Click to read the configuration currently written to the CSA. You
can read the current configuration and modify the settings if
desired. Checking to see if a configuration can be read is also a
good method for verifying that the CSA is properly attached and
ready to have a configuration written to it.
Write to adapter:
Click to physically configure the CSA with the settings entered
into the utility.
Warning! Do not remove the CSA during the writing process, or
you can damage the CSA!
New:
Click to enter settings for a new configuration, with all the settings
starting at default.
Open:
Click to open a previously saved configuration.
Save as:
Click to save a configuration for future use. If you need to use the
CSA with multiple devices and/or applications, you may want to
save a configuration for each, instead of manually entering settings
every time you need to re-configure the CSA.
CHAPTER 3: CONFIGURATION UTILITY | 21