Socket RS-232 serial User Manual page 13

6. Click Write to adapter to configure your CSA with the new settings.
Click
Write to
adapter.
7. Unplug the CSA from the computer. Now you are ready to configure the
second CSA.
Set up the Initiator
1. In the Device role box, select Initiator. Click Properties.
Select
Initiator.
2. In the General screen, change the Friendly Name if desired. For example,
you may want to enter a name like "Socket SPP-Initiator."
Important!
If you do not click
Write to adapter,
the CSA will not
be configured with
the new settings!
Click
Properties.
CHAPTER 2: SETUP | 13