General Properties - Socket RS-232 serial User Manual

General Properties

The General properties page displays general device identification,
device class, and service class information. This page appears for
both acceptor and initiator modes.
Friendly Name. If desired, enter a new name. For example, you may want
the friendly name to reflect which device you plan to attach it to.
Class of Device/ Service Class: ADVANCED USERS ONLY! If
the CSA is in Acceptor mode, and the Bluetooth device initiating
the connection can only detect and/or connect to certain
device/service classes, make the appropriate selection(s). For more
information, please refer to the Bluetooth Assigned Numbers
document at: www.bluetoothsig.org/assigned-numbers/baseband.htm
Note: If no configuration is loaded, no Bluetooth Address will
appear.
IMPORTANT!
After entering all the adapter properties, click OK to exit the
properties screen. Then click Write to adapter, or the CSA will not
be configured with the new settings!
CHAPTER 3: CONFIGURATION UTILITY | 23