Input Source Selection - Sanyo PLC-XU301A Owner's Manual

Video Input
Input Source Selection (Component, RGB Scart 1-pin)
Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPONENT button or the COMPUTER 1 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼

then press the Point
Use the Point
▲▼
3
RGB(Scart) and then press the SELECT button.
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Note:
When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.45).
3
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Component
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
button.
►
buttons to select Component or
Top Control
INPUT button
Input Menu
Computer 1 ( RGB)
/(Component) / (Scart)
Computer  (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
RGB(PC digital)