Image Adjustment - Sanyo PLC-XU301A Owner's Manual

Image Adjustment

1 Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
adjust and then press the Point
button.
 Use the Point buttons select the desired item
▲▼
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point button to decrease the contrast; press the
◄
Point button to increase the contrast (from 0 to 63).
►
Brightness
Press the Point button to decrease the brightness; press
◄
the Point button to increase the brightness (from 0 to 63).
►
Color
Press the Point button decrease the intensity of the color;
◄
press the Point button increase the intensity of the color
►
(from 0 to 63).
Tint
Press the Point buttons to adjust the tint value to get a
◄►
proper color balance (from 0 to 63).
Color temp.
Use the Point buttons to select the desired Color temp.
◄►
level (High, Mid, Low, or XLow).
white balance (Red)
Press the Point button to lighten red tone; press the Point
◄
button to deepen red tone (from 0 to 63).
►
white balance (Green)
Press the Point button to lighten green tone; press the
◄
Point button to deepen green tone (from 0 to 63).
►
white balance (Blue)
Press the Point button to lighten blue tone; press the
◄
Point button to deepen blue tone (from 0 to 63).
►
Note:
• When the white balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.39).
• When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to
Blackboard or Colorboard.
buttons to select Image
or the
► SELECT
buttons to
◄►
Image adjust Menu
Reset
Store
Selected Image mode
Reset
Store
Use the Point
buttons to adjust the
setting value.
Video Input
◄►
1