Computer Input; Input Source Selection; Computer 2(Analog)) - Sanyo PLC-XU301A Owner's Manual

Computer Input

Input Source Selection (RGB: Computer 1/Computer (Analog))
Direct Operation
Choose either Computer 1(RGB) or Computer 1(Scart) or Computer (Analog) by pressing the INPUT button
on the top control or press the COMPUTER 1 button or Computer 2 on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼

When Computer 1 is selected, press the Point
3
button to access the submenu items. Use the Point
buttons to select the RGB input source and then
▼
press the SELECT button.
Note:

When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER  button
Computer  (PC digital)
Computer  (AV HDCP)
Computer  (Analog)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1.
Top Control
INPUT button
Input Menu
►
▲
Computer
1
Computer 1 ( RGB)
/(Component) / (Scart)
Computer  (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
NTSC
RGB(PC digital)