Input Source Selection (Rgb(Pc Digital), Rgb; Hdcp)) - Sanyo PLC-XU301A Owner's Manual

Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Choose Computer  (PC digital) or Computer  (AV HDCP) by pressing the INPUT button on the top control
or press the COMPUTER 2 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼

then press the Point
Use the Point ▲▼ buttons to select RGB(PC digital)
3
or RGB(AV HDCP) and then press the SELECT
button.
 Note:
• When the Input Search function is set to On1 or On, the
input signal will be searched automatically (p.45).
• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content
delivered by DVI (Digital Visual Interface) from being
copied. The specification of HDCP is decided and
controlled by Digital Content Protection, LLC. Should the
specification be changed, this projector may not display
the digital content protected by HDCP.

COMPUTER  button
Computer  (PC digital)
Computer  (AV HDCP)
Computer  (Analog)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer  and
button.
►
Top Control
INPUT button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer  (PC digital) /
Input Menu
Computer

(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
NTSC