Table of Contents
Advertisement
Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the Point
or the SELECT button. Move the highlight to the
►
Mode that you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and then press the
Point
or the SELECT button. Move the highlight to one of
►
the Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Note:
• Display area (H/V) cannot be selected when 0i, i, 0p, p, 0p, 103i or 100i is selected in the
PC System Menu (p.29).
• PC adjust Menu cannot be selected when Computer (PC digital) and Computer (AV HDCP) are selected in
the Input Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
3
Mode free
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
Store
Store
Press MENU button
to close this dialog
box.
This Mode has stored
parameters.
Vacant
store?
Press SELECT button to
store the stored data.
Advertisement
Table of Contents
