Table of Contents
Advertisement
3.
Using the UP arrow key, navigate to Setup Fax and press
OK.
4.
Using the UP arrow key, navigate to dial prefix and press
OK.
5.
Enter your dialling prefix, then press OK to confirm.
6.
Press Return to go back to the main menu settings
screen.
Automatic redial
You can set the fax to automatically redial if the initial fax
transmission fails. The machine will redial on:
>
Line busy
>
No answer
>
Communication error
To set auto-redial:
1.
Press the Menu button to prompt the menu settings
screen.
2.
Using the UP arrow key, navigate to Fax Settings and
press OK.
3.
Using the UP arrow key, navigate to Setup Fax and press
OK.
4.
Using the DOWN arrow key, navigate to Re-dial and press
OK.
5.
Select the required number of redial attempts (between 0
and 10), then press OK.
6.
Using the DOWN arrow key, navigate to Redial Interval
and press OK.
7.
Select the required redial interval (between 1 and 6
minutes), then press OK.
8.
Press Return to store the new configuration settings and
exit the menu.
Configuring your machine > 69
Advertisement
Table of Contents
