Table of Contents
Advertisement
Manual feed
If you need to send multiple sets of documents from the ADF or
flatbed, enable the "Manual Feed" option.
To set the fax to manual feed:
1.
Place your document(s) with text face UP in the ADF or
face DOWN on the glass.
2.
Press the Fax Mode button on the control panel to prompt
the Fax screen.
3.
Press the Additional Settings button.
4.
Using the DOWN arrow key, navigate to the Manual Feed
setting and press OK.
5.
Select "ON" and press OK.
6.
Press Return to exit the menu and return to the fax
screen.
7.
Press Mono to start scanning the first document.
Once the current scanning operation is complete, the LCD
will display "To scan another page press select/OK". If you
have further documents to scan press OK to continue
scanning or press Mono to continue sending the fax.
Fax Forwarding
1.
Press Menu to prompt the menu settings screen.
2.
Using the UP arrow key, navigate to Management and
press OK.
3.
When prompted, enter the password and press OK.
4.
Using the UP arrow key, navigate to Fax Forwarding and
press OK.
5.
Select either Fax To Fax or Fax To Email and press OK.
(a)
If Fax To Fax is selected, enter the destination Fax
number and press OK.
(b)
If Fax To Email is selected, enter the forwarding
Email address and press OK.
6.
Press Return to update selections and exit the menu.
Operation > 98
Advertisement
Table of Contents
